Finite Element Modeling of Nonlinear Structural Response Under Coupled Thermo-Mechanical Loading: A Validation and Sensitivity Study

Authors

  • Irvin Di Santos University of the Philippines Author

Keywords:

finite element method, thermo-mechanical coupling, geometric nonlinearity, elevated-temperature steel

Abstract

In this paper, a nonlinear finite element model is designed and tested to solve problems of thermal and mechanical forces acting on a structure at the same time. A symmetric shallow two-bar steel system is used due to its ability to integrate large-displacement behavior, thermal expansion, temperature-dependent stiffness and strength and a well-defined limit point. The thermal field is given and passed to the structural solution in a sequentially coupled formulation; this is suitable when the feedback between the deformation and the plastic dissipation on the temperature field is negligible. Corotational truss kinematics, thermal strain and bilinear temperature dependent plasticity are incrementally solved through Newton-Raphson iteration. The credibility of the model is evaluated by the use of analytical equations of equilibrium, tangent stiffness checks, load-step refinement and against known elevated temperature response trends. The numerical and analytical elastic solutions converge to within 0.2% and load-step refinement alters the forecasted limit load by not more than 0.5%. At a service load of 150 kN, heating causes the limit load to increase at first (399.6 kN at 20 C to 439.5 kN at 400 C) and secondly (above 400 C) the material degradation, making the mechanical displacement relative to the thermally free position increase to 4.85 mm at 20 C and 11.93 mm at 400 C. Span, initial rise, cross-sectional area, and elastic modulus are the most significant inputs found in the local sensitivity analysis. The results indicate why the geometric nonlinearity, temperature-dependent properties, and explicit uncertainty screening are needed to obtain defensible thermo-mechanical finite element predictions.

Author Biography

  • Irvin Di Santos, University of the Philippines

    Postgraduate

References

American Society of Mechanical Engineers. (2019). Standard for verification and validation in computational solid mechanics (ASME V&V 10-2019). ASME.

Asserin, O., Loredo, A., Petelet, M., & Iooss, B. (2011). Global sensitivity analysis in welding simulations: What are the material data you really need? Finite Elements in Analysis and Design, 47(9), 1004-1016. https://doi.org/10.1016/j.finel.2011.03.016

Belytschko, T., Liu, W. K., Moran, B., & Elkhodary, K. (2014). Nonlinear finite elements for continua and structures (2nd ed.). Wiley.

Comite Europeen de Normalisation. (2024). Eurocode 3: Design of steel structures-Part 1-2: Structural fire design (EN 1993-1-2:2024). CEN.

Corrado, A., Magisano, D., Leonetti, L., & Garcea, G. (2024). Sensitivity to intensity and distribution of the temperature field in the nonlinear thermo-mechanical analysis of laminated glass plates. International Journal of Non-Linear Mechanics, 165, 104792. https://doi.org/10.1016/j.ijnonlinmec.2024.104792

Crisfield, M. A. (1991). Non-linear finite element analysis of solids and structures: Volume 1, essentials. Wiley.

Dassault Systemes. (2024). Abaqus 2024 documentation: Fully coupled thermal-stress analysis. Dassault Systemes Simulia.

Franssen, J.-M. (2005). SAFIR: A thermal and structural program for modeling structures under fire. Engineering Journal, 42(3), 143-158.

Koric, S., Hibbeler, L. C., & Thomas, B. G. (2009). Explicit coupled thermo-mechanical finite element model of steel solidification. International Journal for Numerical Methods in Engineering, 78(1), 1-31. https://doi.org/10.1002/nme.2476

Li, J., Romero, I., & Segurado, J. (2019). Development of a thermo-mechanically coupled crystal plasticity modeling framework: Application to polycrystalline homogenization. International Journal of Plasticity, 119, 313-330. https://doi.org/10.1016/j.ijplas.2019.04.008

Naser, M. Z. (2018). Deriving temperature-dependent material models for structural steel through artificial intelligence. Construction and Building Materials, 191, 56-68. https://doi.org/10.1016/j.conbuildmat.2018.09.186

Neto, D. M., Martins, J. M. P., Cunha, P. M., Alves, J. L., Oliveira, M. C., Laurent, H., & Menezes, L. F. (2018). Thermo-mechanical finite element analysis of the AA5086 alloy under warm forming conditions. International Journal of Solids and Structures, 151, 99-117. https://doi.org/10.1016/j.ijsolstr.2017.06.011

Saltelli, A., Ratto, M., Andres, T., Campolongo, F., Cariboni, J., Gatelli, D., Saisana, M., & Tarantola, S. (2008). Global sensitivity analysis: The primer. Wiley.

Xi, F., Luan, T., & Cao, W. (2016). Large deflection response of restrained steel beams under fire and explosion loads. SpringerPlus, 5, 752. https://doi.org/10.1186/s40064-016-2509-6

Zienkiewicz, O. C., Taylor, R. L., & Zhu, J. Z. (2013). The finite element method: Its basis and fundamentals (7th ed.). Butterworth-Heinemann.

Downloads

Published

2026-07-30

Issue

Section

Articles

How to Cite

Di Santos, I. . (2026). Finite Element Modeling of Nonlinear Structural Response Under Coupled Thermo-Mechanical Loading: A Validation and Sensitivity Study. European Journal of Computational Modeling & Mechanics, 1(1), 1-9. https://isrnjournals.org/publications/index.php/computational-modeling-mechanics/article/view/23